Feeding granularity:≤150mm,feeding concentration:≥45%
Handling capacity:70-100T
Application fields:Dehydrate and separate the fine material.
Applicable materials:Coal slime,tailings.
Toll-free hotline for 7*24 hours:WhatsApp:+86 15236742901
ZSM/DSM dewatering screen is a special equipment for coal slime dewatering operation. It is mainly composed of screen box, vibration exciter, supporting system and motor. It drives two unconnected vibrators through the belt coupling shaft for synchronous reverse operation. The centrifugal force generated by the eccentric mass of the group is superimposed along the component of the vibration direction, and reverse centrifugally canceled, thereby forming a single exciting vibration along the vibration direction, so that the screen box acts as a reciprocating linear motion.
1. The whole screen is installed horizontally, but the screen is installed at a negative angle to ensure the effect of forced dehydration.
2. The vibration frequency can be adjusted at any time through the frequency converter to achieve the best dehydration effect.
3. he integral base frame is equipped for easy handling and installation.Relying on the filter layer on the screen to intercept fine particles and backlog dehydration.
4. Set up the feeding box to ensure the material evenly fed into the screen surface.
5.The cambered screen surface is arranged in the feeding section. to improve the dehydration efficiency.
ZSM/DSM dewatering screen drives two mutually independent vibrators respectively through the tape coupling to make synchronous reverse operation. The centrifugal force generated by the two sets of eccentric masses is superposed on the vibration direction, and the centrifugal force is counterbalanced so as to form a single excited vibration in the direction of vibration so as to make the sieve box operate with the reciprocating straight line.
Model | Screen surface | Feeding granularity mm | Handling capacityt/h | Vibrating frequency | Double amplitude | Motor powerKW | Outline dimension(L*W*H)mm | Weight kg | ||
Area | Screen size mm | Screen structure | ||||||||
ZSM1542 | 6 | 0.25-13 | Slot | ≤300 | 75-100 | 800 | 9-10 | 11 | 4500*2690*1710 | 4016 |
ZSM1556 | 8 | 13-50 | Punch or strip | ≤300 | 30-60 | 800 | 10 | 15 | 5850*2675*1703 | 4642 |
2ZSM1556 | 8 | Upper13-50;Lower0.25-13 | Upper punch and lower strip | ≤300 | 30-60 | 800 | 11 | 15 | 5850*2575*2023 | 5649 |
ZSM1556B | 8 | 13-50 | Punch or strip | ≤300 | 30-60 | 800 | 11 | 7.5*2 | 5850*2854*1707 | 4769 |
2ZSM1556B | 8 | Upper13-50;Lower0.25-13 | Upper punch and lower strip | ≤300 | 30-60 | 800 | 11 | 7.5*2 | 5850*2854*2023 | 5790 |
ZSM1756A | 9.5 | 13-50 | Punch or strip | ≤300 | 50-80 | 800 | 10 | 15 | 5850*2925*1703 | 5098 |
2ZSM1756A | 9.5 | Upper13-50;Lower0.25-13 | Upper punch and lower strip | ≤300 | 50-80 | 800 | 10 | 15 | 2550*2770*2015 | 6105 |
ZSM1756B | 9.5 | 13-50 | Punch or strip | ≤300 | 50-80 | 800 | 10 | 7.5*2 | 5850*3104*1703 | 5226 |
2ZSM1756B | 9.5 | Upper13-50;Lower0.25-13 | Upper punch and lower strip | ≤300 | 50-80 | 800 | 10 | 7.5*2 | 5850*3104*2020 | 6246 |
ZSM1856 | 10 | 13-50 | Punch or strip | ≤300 | 50-80 | 800 | 11 | 11 | 5600*2778*1557 | 4580 |
ZSM2065 | 13 | 13-50 | Punch or strip | ≤300 | 70-100 | 800 | 11 | 18.5 | 6750*3208*1885 | 6577 |
2ZSM2065 | 13 | Upper13-50;Lower0.25-13 | Upper punch and lower strip | ≤300 | 70-100 | 800 | 11 | 18.5 | 6750*3140*2180 | 7946 |
ZSM2065B | 13 | 13-50 | Punch or strip | ≤300 | 70-100 | 800 | 9 | 11*2 | 6750*3428*1880 | 6701 |
2ZSM2065B | 13 | Upper13-50;Lower0.25-13 | Upper punch and lower strip | ≤300 | 70-100 | 800 | 11 | 11*2 | 6750*3428*3185 | 8068 |
Model | Screen surface | Feeding granularity mm | Handling capacityt/h | |
Area | Screen structure | |||
ZSM1542 | 6 | Slot | ≤300 | 75-100 |
ZSM1556 | 8 | Punch or strip | ≤300 | 30-60 |
2ZSM1556 | 8 | Upper punch and lower strip | ≤300 | 30-60 |
ZSM1556B | 8 | Punch or strip | ≤300 | 30-60 |
2ZSM1556B | 8 | Upper punch and lower strip | ≤300 | 30-60 |
ZSM1756A | 9.5 | Punch or strip | ≤300 | 50-80 |
2ZSM1756A | 9.5 | Upper punch and lower strip | ≤300 | 50-80 |
ZSM1756B | 9.5 | Punch or strip | ≤300 | 50-80 |
2ZSM1756B | 9.5 | Upper punch and lower strip | ≤300 | 50-80 |
ZSM1856 | 10 | Punch or strip | ≤300 | 50-80 |
ZSM2065 | 13 | Punch or strip | ≤300 | 70-100 |
2ZSM2065 | 13 | Upper punch and lower strip | ≤300 | 70-100 |
ZSM2065B | 13 | Punch or strip | ≤300 | 70-100 |
2ZSM2065B | 13 | Upper punch and lower strip | ≤300 | 70-100 |